Top Hardware Items Contractors Buy in Siyaganj (Checklist)

A checklist of the steel, mesh, wire and tools contractors usually buy in Siyaganj, Indore, grouped so you can send one list and get one rate.

Published 7 Feb 2025Updated 13 Oct 20262 min readHM Ibrahim & Co, Siyaganj, Indore, since 1939

Quick answer: Group the list by material: steel sections, TMT and binding wire, mesh and fencing, nails and fasteners, tools and consumables. One list, one counter, one delivery.

Contractors and builders in Siyaganj, Loha Mandi, and New Siyaganj regularly buy a set of steel and hardware items for construction and fabrication. This checklist covers the main products so you can plan your list and ask us for the rate.

Structural Steel (Indore / Siyaganj)

TMT Bars: For RCC columns, beams, slabs. Sizes 6 mm to 32 mm; grades Fe 500, Fe 550.
MS Angles: For frames, brackets, and fabrication. 25 x 25 to 100 x 100 mm and more.
MS Flats: For grills, base plates, and brackets.
MS Channels: For purlins and structural frames.
MS Round Bars: For anchors and general fabrication.

See Structural Items for the full range.

Staff carrying a mesh roll through the shop

Pipes and Conduits

GI Pipes: For water lines and fencing. NB 15 mm to 150 mm.
MS Pipes: For structural and handrail use.

Fencing and Mesh

Chain Link Fencing: For compound boundaries. Mesh 1" to 4", heights 3 ft to 10 ft.
Barbed Wire: For boundary tops and farm fencing.
GI Weldmesh / MS Weldmesh: For RCC slabs, partitions, cages.
GI Wire: For binding and fencing.

See Fencing Material, Wiremesh, and Welded Mesh.

Weighing nails and wire in an orange bowl

Wires and Ropes

Binding Wire: For RCC tying.
GI Wire: For general tying and fencing.
MS Wire Rope / GI Wire Rope / SS Wire Rope: For lifting and rigging, cut to length.
Wire Rope Clamp: Galvanised U-bolt clips to join or end the rope.
Clutch Wire: Thin-gauge wire in spools.

Construction Tools and Consumables

Welding Rods: E6013, E7018, etc.
Cutting Disc & Grinding Wheels: For metal cutting and grinding.
Cover block: For rebar cover in RCC.
Shikanja: For formwork and shuttering.
Crowbar (sabbal): For demolition, prying and digging.
Sledge Hammer: For demolition and driving stakes.
Pickaxe (geti): For hard ground and trench work.
Shovel (faurdha): For site digging; also with handle.
Construction Sponge: For cleaning and finishing.
MS Holepass: Galvanised L-brackets for pipe support and mounting.
Wire Nails and Roofing Nails: For structural and roofing.

See Construction Tools and Nails.

How to Use This Checklist in Siyaganj

List the items and quantities you need, then send it to us for a quote. Mention your project type (residential, commercial, industrial) and location (Indore, Dewas, Pithampur, Ujjain) for accurate availability and delivery options.